brocade-communications-sy rfs6000 用户手册

smart-rf config commands

25

schedule-calibrate

Configures the calibrate schedule parameters 

This is used to configure parameters that schedule the automatic configuration of the Smart RF 
feature.

Supported in the following platforms:

•

Mobility RFS4000 Controller

•

Mobility RFS6000 Controller

•

Mobility RFS7000 Controller

Syntax

schedule-calibrate [enable |interval |start-time]

schedule-calibrate interval 

<1-366>

schedule-calibrate start-time 

<HH:MM> <1-31> <1-12>

<2008-2035>

Parameters

Example

RFController(config-wireless-smart-rf)#schedule-calibrate enable

RFController(config-wireless-smart-rf)#schedule-calibrate interval 2

RFController(config-wireless-smart-rf)#schedule-calibrate 

start-time 10:30 1 1

RFController(config-wireless-smart-rf)#

enable

Enables the schedule-calibrate feature. When enabled, the Smart 
RF auto calibration feature is performed at the set interval.

interval <1-366>

Sets the interval in days between each auto calibration.

start-time <HH:MM> 
<1-31> <1-12> 
<2008-2035>

Sets the time and day to start the first auto-calibration. <HH:MM> 
is in 24 hours format.