Konica Minolta fs-505 um 1-1-0 用户手册

Copy operations

Finisher FS-505

2-9

!

There are two types of staple cartridges for finisher FS-505. The 50-sheet 
staple cartridge can staple up to 50 sheets. The 100-sheet staple 
cartridge can staple up to 100 sheets. Specify the number of copies 
according to the paper size, stapling method and number of sheets 
stapled, and then adjust the number of sheets loaded in the main tray.

In order for the copies to be stapled, all of the following conditions must 
be met.

There are four Foolscap sizes: 8-1/4 × 13" w, 8-1/8" × 13-1/4" w, 8-1/2" 
× 13" w and 8" × 13" w. Any one of these sizes can be selected. For 
details, contact the service representative.

If the "Mixed Original" setting is selected, all copies must have the same 
paper width.

If a Staple setting is selected, the "Sort" setting is automatically selected.

A Staple setting cannot be used together with the "Offset" setting.

If a Staple setting is to be selected, select the orientation in which the 
original is positioned and the orientation of the page to be stapled, 
otherwise the copies may not be stapled as desired.

For details on specifying the original orientation, refer to Copy Operations 
of the user manual.