Konica Minolta 7145i gev2 用户手册
Making Fold in Copies (Fold / Fold & Stitch) (continued)
3-49
5.
Select additional copy conditions, as desired.
• 2-2 copy mode is also available. Simplex copy mode (1-1 or 2-1) cannot
be selected.
• To release the Booklet selection, touch APPLICATION on the Basic
Screen to display the Application Selection Screen, then touch Booklet
to deselect it.
to deselect it.
6.
Enter the desired print quantity from the control panel keypad.
• See p. 10-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
• See p. 3-7 for details on setting print quantity.
7.
Position original(s).
When loading originals, heed the following limits on capacity:
Fold mode:
Fold mode:
no limit
Fold & Stitch mode: 60 sheets or less (single-sided)
30 sheets or less (double-sided)
Exceeding the above capacity limits may cause trouble in the finisher.
See p. 3-2 to p. 3-6 for details on positioning originals.
8.
Press [START].
Press [STOP] to suspend the scanning or printing job.
When the Saddle tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-2, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Paper Size
Fold /
Fold&Stitch
Output with
Inner Tray