Konica Minolta 7145i gev2 用户手册

The Key Operator is trained to handle all special Key Operator functions that are not
accessible to the general user, such as monitoring overall copier activity, machine
performance, and service information, modifying machine settings, and controlling user
activity, for billing purposes.
A unique 1 to 8-digit Key Operator password is normally set by service at installation. If
the unique code is not set by service, the copier will not display Key Operator Password
Entry Screen when the Key Operator mode is being accessed, and a Key Operator
password will not be required. A service-set 8-digit User account (E.K.C.) master key
code must be entered by the Key Operator to access the Electronic Key Counter
functions, and a service-set 4-digit Weekly Timer master key code must be entered by
the Key Operator to access the Weekly Timer functions.

Press [HELP] on the control panel to display the Help Screen.

Touch Key Ope mode on the Help Screen.

Touch Password, enter your Key Operator password (up to 8 
alphanumerical characters) using the touch screen keypad or the 
control panel keypad, then touch OK both on the Data Input Screen 
and Password Entry Screen.

If Enhanced Security mode has been used in the machine, the password
entry procedure will be slightly different. Refer to the Instruction Manual
provided for the Security mode.

To ensure the security of Key Operator mode, it is recommended that you establish a
unique Key Operator password, along with the User account (E.K.C.) master key
code and Weekly Timer master key code, and keep them in a confidential file.