Konica Minolta 7145i gev2 用户手册
[12] Memory Switch (continued)
13-44
Procedure
1 Touch 12. Memory SW on the System/Copier Setting Menu Screen to display the
Memory Switch Screen.
2 Use the procedure below to select the desired item and change the setting.
(1) Touch the arrow keys at the right side of the item list to select the desired item.
(2) Touch the arrow keys
(2) Touch the arrow keys
and
at the upper right to scroll the screen.
(3) Touch EDIT to change the setting of the highlighted item.
(4) Repeat above steps (1) to (3) to make several changes in succession.
(4) Repeat above steps (1) to (3) to make several changes in succession.
3 Touch RETURN to restore the System/Copier Setting Menu Screen.
4 If no further changes are required, turn the machine power OFF then ON for normal
4 If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
The following functions can be provided by the Memory switch settings.
[1] Auto reset timer
Sets the time interval for the machine to reset to the initial condition.
Options: Off or 30/60/90/120/150/180/210/240/270/300 seconds.
Sets the time interval for the machine to reset to the initial condition.
Options: Off or 30/60/90/120/150/180/210/240/270/300 seconds.
[2] AUTO/RESET effect
Sets the condition of Copy mode, Copy density, Magnification, and Paper tray selection
when the [AUTO RESET] key is pressed.
Options: Full-auto (factory setting) or Initial setting (key operator setting). Initial is the
default setting.
Sets the condition of Copy mode, Copy density, Magnification, and Paper tray selection
when the [AUTO RESET] key is pressed.
Options: Full-auto (factory setting) or Initial setting (key operator setting). Initial is the
default setting.
[3] Load RADF effect
Determines how the machine initializes when it is in the platen copy mode (non RADF)
and an original is inserted in the RADF feed tray.
Options: RADF and RADF + Auto Reset. The RADF option will activate the RADF
without resetting any other features. The RADF + Auto Reset option will activate the
RADF and reset the machine to the features programmed in memory switch #2.
Determines how the machine initializes when it is in the platen copy mode (non RADF)
and an original is inserted in the RADF feed tray.
Options: RADF and RADF + Auto Reset. The RADF option will activate the RADF
without resetting any other features. The RADF + Auto Reset option will activate the
RADF and reset the machine to the features programmed in memory switch #2.
[4] Non Image Area Erase
Establishes how the machine determines the image area of the copy.
Options: ON and APS/AMS only. ON option limits the copy image area to that of the
original. The APS/AMS only option limits the copy image area to that of the copy paper
sizes and the magnification automatically selected by the machine.
Establishes how the machine determines the image area of the copy.
Options: ON and APS/AMS only. ON option limits the copy image area to that of the
original. The APS/AMS only option limits the copy image area to that of the copy paper
sizes and the magnification automatically selected by the machine.
Memory Switch Screen 2
Memory Switch Screen 3
Memory Switch Screen 4