Konica Minolta 7145i gev2 用户手册
Selecting Magnification Ratio (Lens Mode) (continued)
3-15
To Copy in Zoom Mode
Use the Zoom mode to reduce or enlarge the copied original image in 1% increments.
Specification for Zoom Mode
❒ Zoom range: 25% to 400%
❒ Incompatible Conditions: AMS, Repeat mode in Repeat, Reduce & Shift in Image
Shift
1.
Touch ZOOM on the Basic Screen.
The popup menu for setting a zoom ratio will be displayed.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
press [AUTO RESET].
2.
Touch the Vertical/Horizontal zoom key on the popup menu, if it is not
highlighted, then set the desired zoom ratio.
highlighted, then set the desired zoom ratio.
Use the keypad on the popup menu to enter the desired magnification ratio
in 3 digits, or use arrows (c / d) to scroll to the desired ratio.
If an incorrect ratio is entered, continue by entering the correct 3-digit ratio.
in 3 digits, or use arrows (c / d) to scroll to the desired ratio.
If an incorrect ratio is entered, continue by entering the correct 3-digit ratio.
3.
Touch OK.
The popup menu disappears automatically and the specified zoom ratio will be
displayed on the Basic Screen.
displayed on the Basic Screen.
4.
Select additional copy conditions, as desired.
5.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
6.
Position original(s).
See p. 3-2 to p. 3-6 for details on positioning originals.
7.
Press [START].
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-2, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Paper Size
Fold /
Fold&Stitch
Output with
Inner Tray