Konica Minolta 7145i gev2 用户手册

Finisher FS-112 is initially equipped with two exit trays, and up to two
optional exit trays (FT-107) can be installed. Contact your ser vice
representative, if desired.
Finisher FS-113 is equipped with a primary (main) and a secondary (sub)
exit trays.
Finisher FS-114 is equipped with two exit trays, and one optional exit tray
(BK-114 Branch kit) can be installed. Contact your service representative, if
desired.

The copier with FS-112/FS-114 is initially set to output to tray 1 in Sort mode, and the
copier with FS-113 is initially set to output to the primary (main) tray in Sort mode.
Follow the procedure below to change the output mode, as desired.

❒ If using the transparent film to copy in the copier with FS-113, be sure to select the 

secondary (sub) tray as an output tray.

❒ Incompatible with Sort mode: Using platen glass (unless Image Insert, Dual Page, 

or Platen store mode is used), OHP Interleave, Non-Image Area Erase, Repeat, 
AUTO Layout

❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet, OHP 

Interleave, Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp 
(Numbering)

Close the RADF securely, then press [AUTO RESET].

Key Operator can change the initial output mode. See p. 13-11 to p. 13-13.

(1) Touch OUTPUT on the Basic Screen to display the Output Mode popup menu.

Output Mode popup menu (FS-112)

Output Mode popup menu (FS-113)

Positioning 

Originals

Setting Print 

Quantity

Stop 

Scan/Print

Lens Mode

Density

1-2, 2-2

2-1

Staple

Punch

Multi-Sheet 

Bypass Tray

Using 

Memory

Output without 

Finisher

Output with 

Finisher

Paper Size

Fold / 

Fold&Stitch

Output with

Inner Tray