Jenn-Air JDS8860 用户手册

■

Nonabrasive plastic scrubbing pad and mildly abrasive 
cleanser:

Clean as soon as cooktop, grates and caps are cool.

■

Gas Grate and Drip Pan Cleaner Part Number 31617:

See “Assistance or Service” section to order.

See “Sealed Surface Burners” section.

■

Glass cleaner and a soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

affresh™ Kitchen and Appliance Cleaner Part Number 
W10355010 (not included):

See “Assistance or Service” section to order.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle: 

See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad

WARMING DRAWER (on some models)

Make sure drawer is cool and empty before cleaning.

For more information, see “Warming Drawer” section.

■

Mild detergent

The oven uses a 120-volt, 20-watt maximum halogen bulb. See 
the “Assistance or Service” section to order. Ask for Part Number 
74004458.

Before replacing, make sure the oven is off and cool.

1. Unplug range or disconnect power.

2. Use fingertips to grasp edge of bulb cover. Pull out and remove.

3. Remove bulb from socket by pulling straight out of the 

ceramic base.

4. Replace bulb, using tissue or wearing cotton gloves to handle 

bulb. To avoid damage or decreasing the life of the new bulb, 
do not touch bulb with bare fingers. 

5. Replace bulb cover by snapping back into place.

6. Plug in range or reconnect power.

Remove all items from inside the warming drawer, and allow the 
warming drawer to cool completely before attempting to remove 
the drawer.

1. Open drawer to its fully open position.

2. Locate the black loops on both sides of the drawer.

3. Pull both loops forward at the same time, then pull drawer out 

another inch.

4. Holding the drawer by its sides, not its front, gently pull it all 

the way out.

1. Align the drawer glides with the receiving guides.

2. Push drawer in all the way.

3. Gently open and close the drawer to ensure it is seated 

properly on the slides.

A