Follett c45184 用户手册

下载
页码 16
4
Installation
Installing legs – required
  1.  Remove legs from plastic bag packed inside freezer.
  2.  Tip freezer back and screw legs in all the way to stop (they will extend 
1/8" below base of freezer).
  3.  Adjust legs as needed to level freezer in both directions. To access 
legs, remove the lower front panel. Turn legs clockwise to extend legs.
Temperature surveillance module
Follett’s all-in-one temperature alarm and chart recorder module (manufactured for Follett by Dickson) may be 
included with your FZR5-PL. Please refer to the Dickson instructions packed with this module for set-up and 
operation instructions.
Follett’s monitoring bottle and temperature probe has already been installed in the Follett FZR5-PL. Simply 
connect the loose end of the probe wire on the back of the unit to the surveillance module to complete the install.
A box of sixty (60) -50 to +50 7-day charts have also been included with this module. Replacement charts and 
pens can be ordered from Follett by calling Technical Service at 800-523-9361:
Item # 00162099 — Box of sixty (60), -50 to +50, 7-day replacement charts
Item # 00162081 — Box of six (6) replacement red pens 
Charts with different temperature scales are also available. Contact Dickson at www.dicksondata.com
Fig. 1