Fujitsu PDS4207W-H 用户手册

ENGLISH

SETTING VIDEO SYSTEM AND CLAMP PULSE

VIDEO SYSTEM

VIDEO SYSTEM can be set when the signal is connected to the VIDEO or

S-VIDEO input terminal.

Set by adjusting to the connected signal.

In VIDEO or S-VIDEO mode, press the MENU button to select SOURCE.

Select with the ADJUST button.

Pressing the ADJUST button moves the selection to the next item as be-

low.

∗

When N-PAL and M-PAL signals are input, signals cannot be received

successfully in AUTO mode. Select either N-PAL or M-PAL.

∗

This setting can be done in VIDEO mode and S-VIDEO mode only. The

VIDEO SYSTEM setting is saved for VIDEO mode and S-VIDEO mode.

CLAMP PULSE

When connecting a color difference signal to the COMPONENT VIDEO

input terminal, CLAMP PULSE must be set.

This setting switches the phase of the clamp pulse.

The ADJUST button can be adjusted in the range from 0 through 4.

Select so that optimum picture is attained.

∗

This setting can be done in COMPONENT VIDEO mode only.

CLAMP PULSE
0

RETURN

ADJUST

SET

AUTO NTSC PAL SECAM

4.43NTSC M-PAL N-PAL

VIDEO SYSTEM
AUTO

RETURN

SELECT

Adjustment items

• Pressing the SET button moves selection to the next item.

• Set CLAMP PULSE as follows, depending on the connected device signal.

1 : MUSE signal (Hi-Vision – Japanese high definition video signal)

4: NTSC, PAL, SECAM

When connecting the other devices than the ones described above, adjust the clamp pulse so that the optimum image is

obtained.

If there is no operation for 60 seconds, the screen display goes off.