Casio green slim xj-a155v 用户手册

POWER

: Amber flashing  

Red steady

The projector was turned off automatically due to some problem that was 
probably caused by external digital noise or some other reason. Confirm 
that the POWER/STANDBY indicator is lit red (without flashing). After 
checking the POWER/STANDBY indicator, disconnect the power cord 
from the projector and wait for all of the projector’s indicators to go out. 
Next, reconnect the power cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.

TEMP

: Red steady

LIGHT

: –

Message

: –

POWER

: Amber flashing  

Red steady

The projector was turned off automatically because the light source unit 
turned off or did not turn on. After confirming that the POWER/STANDBY 
indicator is lit red (without flashing), unplug the power cord. Wait for a 
short while and then plug it back in and turn on the projector again.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.

TEMP

: Red flashing 

(0.5-second interval)

LIGHT

: Red flashing 

(0.5-second interval)

Message

: –

POWER

: Amber flashing  

Red steady

Power has turned off automatically due to a projector memory error. 
Confirm that the POWER/STANDBY indicator is lit red (without flashing). 
After checking the POWER/STANDBY indicator, disconnect the power 
cord from the projector and wait for all of the projector’s indicators to go 
out. Next, reconnect the power cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.

TEMP

: Red flashing 

(2-second interval)

LIGHT

: Not lit or red flashing

Message

: –

POWER

: Amber flashing  

Red steady

Power has turned off automatically because the light source unit cover is 
open. Perform the following steps.

 After confirming that the POWER/STANDBY indicator is lit red (without 

flashing), disconnect the power cord from the projector.

 Check to make sure that the light source unit cover is closed.

 Plug the power cord back in and turn the projector back on again.
If the error occurs again when you turn power back on, contact your 
retailer or nearest authorized CASIO Service Center.

TEMP

: Amber flashing 

(1-second interval)

LIGHT

: –

Message

: –