Directed Electronics clifford 320.3x 用户手册
31
© 2009 Directed Electronics. All rights reserved.
Turn Paging off: The remote will not wake up to check for mes-
s
sages with paging off in the setup remote menu.
Note: The remote will not receive trigger messages from the sys-
tem.
Turn Beeps off: The button beeps can be turned off in the setup
Note: The remote will not receive trigger messages from the sys-
tem.
Turn Beeps off: The button beeps can be turned off in the setup
s
remote menu. The command beeps still play normally.
Responder LE Battery Replacement
Battery
Tray
Latch
Side View
Rear View
1
2
+
1. Using a small flat narrow object,
push latch down towards battery tray
while gently prying the tray outwards
from both ends until released. Remove
the tray from the remote control hous-
ing.
push latch down towards battery tray
while gently prying the tray outwards
from both ends until released. Remove
the tray from the remote control hous-
ing.
2. While observing the correct
polarity, replace the old battery (or
polarity, replace the old battery (or
batteries) with a new one. Seat battery (or batteries) flush into tray
and slide back into housing until securely latched. The remote control
is now ready for use.
and slide back into housing until securely latched. The remote control
is now ready for use.
1-way Battery Replacement
Using a small
1.
flathead screwdriver,
insert into slot located
at the bottom of the
keypad and carefully
pry the front of the unit
open.
flathead screwdriver,
insert into slot located
at the bottom of the
keypad and carefully
pry the front of the unit
open.