Lanier 5518 用户手册

User Tools Settings

5 - 3

1. Function Priority 

You can specify the mode to be displayed immediately 

after the operation switch is turned on or System Reset 

mode is turned on.

Default: Copier

2. Copy Count Display)

The copy counter can be set to show the number of copies 

made (count up) or the number of copies remaining to be 

made (count down).

Default: Up (count up)

3. System Reset 

The machine returns to its prioritized mode automatically 

after your job is finished, after the selected time. This 

function is called “System Reset”. The time can be set 

from 10 to 999 seconds, or no system reset.

You can specify the prioritized mode with the user tools.

 Default: On (60 seconds)

4. Energy Saver Timer 

The machine enters Low Power mode automatically after 

your job is finished, after the selected time. The time can 

be set from 1 to 240 minutes.

In Low Power mode, power consumption is reduced by 

30% compared with Standby mode. This value applies to 

5515 Copier features only.

Default:15 minutes

5. Energy Saver Level 

You can select the Energy Saver level. 

•

Power Consumption: 
Reduced by about 40% compared standby mode.

•

Warm-Up  Time: 
about 15 seconds

•

Power Consumption: 
Reduced by about 60% compared standby mode.

•

Warm-Up  Time 
less than 30 seconds

Default: Level 1