National Instruments NI CVS-1450 Series 用户手册

camera are not displayed on the monitor, refer to Appendix A, 

.

Figure 2-3.  Wiring Power to the CVS-1450 Device

If you use a power supply other than the NI desktop power supply, follow 
the instructions in this section to connect power to the CVS-1450 device.

If you are not using the NI desktop power supply, use 0.75 mm

2

, 18 AWG ferrules 

according to manufacturer specifications to terminate the wires leading to the 4-position 
power connector, shown in Figure 2-4. Ferrules are available from Phoenix Contact 
(part number 3200519).

1

4-Position Power Connector

2

NI Desktop Power Supply

3

Power Supply Cord (to Outlet)

1

3

To Outlet

2