NEC PD78078 用户手册

PG-1500

PROM Programmer

PA-78P078GC

PA-78P078GF

PA-78P078KL-T

PROM Programmer Adapter

A PROM programmer that, by connecting the attached board and separately

available PROM programmer adapter, is capable of programming single-

chip microcomputers incorporating a PROM on stand-alone basis or

through operation from the host machine.

Also capable of programming typical 256-Kbit to 4-Mbit PROM.

A PROM programmer adapter for the 

µ

PD78P078 and 

µ

PD78P078Y.

Used connected to the PG-1500.

PA-78P078GC

:

100-pin plastic QFP (GC-7EA, GC-8EU type)

PA-78P078GF

:

100-pin plastic QFP (GF-3BA type)

PA-78P078KL-T :

100-pin ceramic WQFN (KL-T type)

PG-1500  Controller

Connects PG-1500 and the host machine with serial and parallel interface,

and controls the PG-1500 on the host machine.

The PG-1500 controller is a DOS-based application.  Use it with the DOS

prompt on Windows.

Part number:  

µ

SxxxxPG1500

xxxx in the part number differs depending on the host machine and OS used.

µ

Sxxxx PG1500

xxxx

Host Machine

OS

Supply Media

5A13

PC-9800 series

MS-DOS

3.5-inch 2HD FD

(ver. 3.30 to ver. 6.2

)

5B13

IBM PC/AT and

Refer to B.4

3.5-inch 2HC FD

compatibles

MS-DOS ver. 5.0 or later has a task swap function, but it cannot be used with the

above software.