National Instruments PCI-1200 用户手册
Chapter 4
Theory of Operation
© National Instruments Corporation
4-3
The PCI-1200 generates an interrupt in the following five cases (each of
these interrupts is individually enabled and cleared):
these interrupts is individually enabled and cleared):
•
When a single A/D conversion can be read from the A/D FIFO
memory.
memory.
•
When the A/D FIFO is half-full.
•
When a DAQ operation completes, including when either an
OVERFLOW or an OVERRUN error occurs.
OVERFLOW or an OVERRUN error occurs.
•
When the digital I/O circuitry generates an interrupt.
•
When a rising edge signal is detected on the DAC update signal.
Timing
The PCI-1200 uses two 82C53 counter/timer integrated circuits for internal
DAQ and DAC timing and for general purpose I/O timing functions.
Figure 4-3 shows a block diagram of both groups of timing circuitry
(counter groups A and B).
DAQ and DAC timing and for general purpose I/O timing functions.
Figure 4-3 shows a block diagram of both groups of timing circuitry
(counter groups A and B).