Konica Minolta dimage scan elite ii 用户手册
When more than one external device are con-
nected to the computer, repeat the procedure
above except right click on the unplug-or-eject-
hardware icon. This will open the unplug-or-
eject-hardware window after clicking on the small
window indicating the unplug operation.
nected to the computer, repeat the procedure
above except right click on the unplug-or-eject-
hardware icon. This will open the unplug-or-
eject-hardware window after clicking on the small
window indicating the unplug operation.
On the unplug-or-eject-hardware window, the
hardware devices to be stopped will be dis-
played. Highlight the device by clicking on it then
click the stop button.
hardware devices to be stopped will be dis-
played. Highlight the device by clicking on it then
click the stop button.
17
A confirmation screen will appear to indicate the
devices to be stopped. Click the OK button to stop
the device.
devices to be stopped. Click the OK button to stop
the device.
A third and final screen will appear to indicate the
scanner can be safely disconnected from the com-
puter; click OK. Turn the scanner off and then dis-
connect the cable.
scanner can be safely disconnected from the com-
puter; click OK. Turn the scanner off and then dis-
connect the cable.
Disconnecting the IEEE cable with Windows ME
To disconnect the scanner, quit the DiMAGE Scan Utility. Left click on the unplug-or-
eject-hardware icon located on the task bar. A small window will open indicating the
device to be stopped.
eject-hardware icon located on the task bar. A small window will open indicating the
device to be stopped.
Click on the small window to stop
the device. The safe-to-remove-
hardware window will open. Click
OK. Turn the scanner off and
then disconnect the cable.
the device. The safe-to-remove-
hardware window will open. Click
OK. Turn the scanner off and
then disconnect the cable.