Konica Minolta 4343-ps038-07 用户手册
3 Printer Agent Configuration
14
3.4 Device Detection Settings
After clicking the [Advanced] button, various settings can be made to
specify the location in which devices are detected.
specify the location in which devices are detected.
On the “Default Setting” tab of the Advanced dialog, you can change the
following two settings:
following two settings:
• SNMP Community Setting:
You can select a different read community (usually specified as
“public”), which is used for communicating with
KONICA MINOLTA printing devices.
“public”), which is used for communicating with
KONICA MINOLTA printing devices.
• IP Discovery Setting:
You can define the maximum hop count (number of routers passed
through) when detecting devices automatically. The default value is
0, and users are allowed to enter a hop count between 0 and 10.
However, for cases when devices are to be located with a hop count
above 10 and for better performance during detection, users can add
an additional subnet in which devices are detected, as described
below.
through) when detecting devices automatically. The default value is
0, and users are allowed to enter a hop count between 0 and 10.
However, for cases when devices are to be located with a hop count
above 10 and for better performance during detection, users can add
an additional subnet in which devices are detected, as described
below.