Konica Minolta micropress release 6 用户手册
22
name.
Unlocking a job
1 Right-click on the job to unlock, then select Lock/Unlock...
2 Enter the password assigned to the job in the dialog box that is displayed.
3 Click OK to unlock the job.
2 Enter the password assigned to the job in the dialog box that is displayed.
3 Click OK to unlock the job.
Hold/Suspend
Use the Hold/Suspend option to set a selected job (not currently printing) to a Hold state. The
job will remain in a Hold state until you release it manually.
To place a job on Hold:
To place a job on Hold:
1 Select the VE that lists the job to be put on hold, then select the job from the Job List
Window.
2 Select Job
Î
Î
Î
ÎHold/Suspend from the menu.
3 The status column displays H for the selected job, and the job is held for printing at a
later time.
To release the suspended job, select the job, then select Print.
Print
Use the Print Job option to take a selected job or jobs from the Job List Window from a Hold,
printed, or error state, and send it to the PrintStation.
To place a job in a printing state:
To place a job in a printing state:
1 Select the VE that lists the job to print, then select the job from the Job List Window.
2 Select Job
2 Select Job
ÎPrint from the menu.
3 The status column of the Job List Window for the selected job displays >> if there is no
other job already printing. If another job is printing, the status column of the job the
user selected will display W; the job will print after all jobs ahead of it have printed.
user selected will display W; the job will print after all jobs ahead of it have printed.
Move...
Use the Move Job option to move a selected job from one VE to another. Moving a job will
not change the printing parameters for the job.
To move a job to another Virtual Engine:
To move a job to another Virtual Engine:
1 Select the VE that lists the job to move, then select the job from the Job List Window.
2 Select Job
2 Select Job
ÎMove from the menu.
3 Select a Virtual Engine.
4 Click OK. The selected job moves to the chosen VE destination.
4 Click OK. The selected job moves to the chosen VE destination.
Note: You cannot use this option to move a grayscale job from the 5050c to either the 060c or the 085c because
the resolutions differ (5050c jobs are ripped at 400 dpi, 8 bits per pixel, whereas 060c and 085c jobs are ripped at
600 dpi, 1 bit per pixel).
the resolutions differ (5050c jobs are ripped at 400 dpi, 8 bits per pixel, whereas 060c and 085c jobs are ripped at
600 dpi, 1 bit per pixel).
Note: Dragging a job into a LaserJet 5Si VE halts printing. When the file finishes copying, the job resumes print-
ing.
ing.
Delete
To remove a job from the PSM:
1 Select the VE that lists the job to delete, then select the job from the Job List Window.
2 Select Job
2 Select Job
ÎDelete from the Job Menu.
3 The job will be removed from the PrintStation Manager Job List window.