Konica Minolta hexar rf 用户手册

 Use two 3V lithium batteries (CR2).   

(1) Adequate power supply (Battery power 

symbol is black).   

(2) Low power (Battery power symbol is 2/3 

blank, 1/3 black). Time to replace the 
battery.  

(3) No more power (1/3 black portion of 

Battery power symbol blinks, then turns 
completely blank). No more picture can be 
taken.  

★ 

When the Battery power symbol is 2/3 blank, 
enough power remains to finish a roll of film 
before replacing the battery.   

Note on replacing battery   
★ 

When replacing the batteries, make sure to turn 
the power switch OFF first.   

★ 

When replacing the batteries with a film loaded 
in the camera, do it quickly (within 30 seconds).   

The exchangeable lenses that can be used with 
this camera are the M-Hexanon Lenses of the KM 
mount type that are made by Konica. Konica will 
not guarantee correct functioning and performance 
if lenses other than these are used. Konica will 
accept no responsibility whatsoever for damages 
and malfunctions that occur from the use of any 
other lenses.   

★ 

First turn off the camera's main switch before 
removing or attaching lenses.   

★ 

When removing or attaching a lens, make sure 
that you hold the main body of lenses, 
otherwise remove and attachment may not be 
correct.