Konica Minolta bizhub 160 gdi um 2.0.0 用户手册
Configuring printer driver settings
5
bizhub160/160f
5-11
How to create a new watermark
1
To create a new watermark, type the desired text in the box.
2
Click the [New] button.
2
Note
Watermark text can be up to 20 characters long.
Watermark text can be up to 20 characters long.
You can have up to 31 different watermarks configured at one time. (in-
cluding “<None>”)
cluding “<None>”)
Delete
Click this button to delete the watermark that is selected in the list.
Shading
Specify a relative density for the watermark text between 10 % and 100 %.
Style
Use these check boxes to turn bold style and italic style on (check box se-
lected) or off (check box cleared).
lected) or off (check box cleared).
Font
Use the settings in this group box to specify the typeface and the point size
of the watermark text.
of the watermark text.
Type Face: You can specify any of the typefaces currently installed on your
computer’s operating system as the typeface of the watermark text.
computer’s operating system as the typeface of the watermark text.
Size: Specify text size between 8 and 200 points.
Angle
Use this setting to specify the angle of the watermark text relative to the pa-
per. The setting range is -90° to +90°.
per. The setting range is -90° to +90°.
A negative (-) value rotates the characters clockwise, 0 specifies the text
should be parallel to the paper, and a positive (+) value rotates the characters
counterclockwise.
should be parallel to the paper, and a positive (+) value rotates the characters
counterclockwise.