Konica Minolta cf2001p um 用户手册
5
Control Panel Messages
5-2
CF2001P
Load xx
OHP in tray1
OHP in tray1
Xx-size overhead projector
transparencies is not loaded
into tray 1.
transparencies is not loaded
into tray 1.
Load xx-size overhead pro-
jector transparencies into
tray 1.
jector transparencies into
tray 1.
Load xx
in any tray
in any tray
Xx-size paper has not been
loaded into any tray.
loaded into any tray.
Load xx-size paper into any
tray.
tray.
Load xx
Thick 1 in tray1
Thick 1 in tray1
Xx-size thick 1 is not loaded
into tray 1.
into tray 1.
Load xx-size thick 1 into
tray 1.
tray 1.
Near trouble ## / ##
Some malfunction occurred
in the printer.
in the printer.
Contact your technical repre-
sentative and inform them of
the error code.
sentative and inform them of
the error code.
No back staples
The back staples have run
out.
out.
Install new back staples.
No front staples
The front staples have run
out.
out.
Install new front staples.
No xxxx toner
Call service
Call service
The toner for the indicated
color is empty.
color is empty.
Ask your technical
representative to refill the
toner for the indicated color.
representative to refill the
toner for the indicated color.
No xxxx toner
Please change
Please change
The toner for the indicated
color is empty.
color is empty.
Refill the toner for the indi-
cated color.
cated color.
Paper jam at
Jx
Jx
A paper jam or staple jam
occurred at the indicated
location.
occurred at the indicated
location.
Power save mode
The printer has entered
Energy Saver mode.
Energy Saver mode.
• To cancel Energy Saver
mode, send a print job, or
open and close a cover.
open and close a cover.
• To change the time for the
printer to enter Energy
Saver mode, contact a
technical representative.
Saver mode, contact a
technical representative.
Printing stopped
Paper is loaded into the
manual bypass tray.
manual bypass tray.
Remove all paper from the
manual bypass tray.
manual bypass tray.
A communication error
occurred.
occurred.
No action required
Printing suspended
Printing has been stopped.
No action required.
Replace
Trans. Belt Unit
Trans. Belt Unit
The service life of the
transfer belt unit has expired.
transfer belt unit has expired.
Replace the transfer belt
unit.
unit.
Service Code
Cxxxx
Cxxxx
An error occurred.
Contact your technical
representative and inform
them of the error code.
representative and inform
them of the error code.
Sleep mode
The printer has entered
Sleep mode.
Sleep mode.
• To cancel Sleep mode,
send a print job, or open
and close a cover.
and close a cover.
• To change the time for the
printer to enter Sleep
mode, contact a technical
representative.
mode, contact a technical
representative.
The guides in tray #
not set right
not set right
The size of the paper loaded
into tray # is incorrect.
into tray # is incorrect.
Load paper of an appropriate
size into tray #.
size into tray #.
Message
Cause
Action
CF2001P.book Page 2 Friday, October 5, 2001 1:26 PM