Konica Minolta di1610 um 1.0.0 用户手册

Using the Utility Mode

Di1610

5-1

There are three menus in the Utility mode.

From the “MACHINE SETTING” menu, various settings for the machine’s 
operating environment can be specified. Refer to the following table for 
details on each function.

1

MACHINE 
SETTING

Used to specify settings for the machine’s operating 
environment.

2

PAPER SOURCE 
SETUP

Used to specify the size and type of paper loaded in Tray1. In 
addition, auto tray switching can be enabled for each tray.

3

COPY SETTING

Used to specify the default settings for each copy function.

1

AUTO PANEL 
RESET

Whether the Auto Panel Reset function is disable or the time 
(0.5 min, 1 min, 2 min, 3 min, 4 min, or 5 min) until the machine 
is reset after finishing copying/printing or after performing the 
last operation can be selected. If the Auto Panel Reset function 
is enabled, all functions are automatically reset to their default 
settings.
• The factory default setting is 1 min.

2

ENERGY SAVE 
MODE

If the machine performs no operations for a set length of time, 
it will automatically enter the Energy Save mode. The length of 
time until the machine enters Energy Save mode can be set 
between 1 and 240 min (in 1 min increments).
• The factory default setting is 15 min.

3

DENSITY (ADF)

The scanning density when using the Auto Document Feeder 
can be adjusted.
Mode 1: For printing lighter copies of dark documents to avoid 
darkening of copies.
Mode 2: For printing copies with same density as documents.
• The factory default setting is “Mode 1”.

4

DENSITY (BOOK)

The density when scanning from the Original Glass can be 
adjusted.
Mode 1: For printing copies with same density as documents.
Mode 2: For printing lighter copies of dark documents to avoid 
darkening of copies.
• The factory default setting is “Mode 1”.