Kenwood KDC-3054UM 用户手册

下载
页码 22
3
ENGLISH
Safety
WARNING
Stop the car before operating the unit.
Important to know...
 To prevent a short circuit, never put or 
leave any metallic objects (such as coins or 
metal tools) inside the unit.
 Caution: Adjust the volume so that you 
can hear sounds outside the car. Driving 
with the volume too high may cause an 
accident.
 Condensation: When the car is air-
conditioned, moisture may collect on the 
laser lens. This may cause disc read errors. 
In this case, remove the disc and wait for 
the moisture to evaporate.
 This unit can only play the CDs with: 
 The illustrations in this manual are 
examples used to explain more clearly 
how the controls are used. Therefore, what 
appears on the illustrations may differ from 
what appears on the actual equipment.
 A USB connection cable, CA-U1EX 
(max.: 500 mA) (optional accessory) is 
required for connecting a USB device.
 You can connect an Apple iPod/iPhone 
with 
.
  The word “iPod” appearing in this manual 
indicates the iPod or iPhone connected 
to this unit with a connection cable, 
KCA-iP102 (optional accessory).
 If you experience problems during 
installation, consult your Kenwood dealer.
 When you purchase external components, 
check with your Kenwood dealer to make 
sure that they work with your model and in 
your area.
 Detailed information and notes about the 
playable audio files are stated in an online 
manual on the following site:
www.kenwood.com/cs/ce/audiofile/
Remote controller (RC-405) is equipped 
for 
 
 
.
 
 can also be remotely 
controlled with an optionally purchased 
remote controller.
Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to 
observe this precaution may result in damage to the monitor or unit.
Cleaning the connector: The unit may not function 
properly if the connectors between the unit and faceplate 
are dirty. Detach the faceplate and clean the connector 
with a cotton swab gently, being careful not to damage 
the connector.
Handling discs
 Do not touch the recording surface of the disc.
 Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
 Do not use any accessories for the disc.
 Clean from the center of the disc and move outward.
 Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
 When removing discs from this unit, pull them out horizontally.
 Remove the rims from the center hole and disc edge before inserting a disc.
Connector (on the reverse 
side of the faceplate)
EN_KDC-U453[M]2.indd   3
EN_KDC-U453[M]2.indd   3
9/6/11   5:42:56 PM
9/6/11   5:42:56 PM