Konica Minolta cf2002 cf3102 um 7.1.0 用户手册
Troubleshooting
8
CF2002/CF3102
8-15
4
Open the front door of the finisher.
5
Turn misfeed-clearing dial
clockwise until the removal indicator
is completely blue.
is completely blue.
H
If the dial is turned too far, turn it
counterclockwise to adjust it.
counterclockwise to adjust it.
H
If the message “Misfeed
detected”. appears, be sure to
perform these steps. If the paper
is pulled out with too much force
without performing these
steps, the finisher may be
damaged.
detected”. appears, be sure to
perform these steps. If the paper
is pulled out with too much force
without performing these
steps, the finisher may be
damaged.
6
Open the upper door of the finisher,
and then pull out any paper in the
feed section.
and then pull out any paper in the
feed section.
7
Close the upper door.
8
Pull out any paper fed into the
output tray.
output tray.
CF2002.book Page 15 Friday, June 13, 2003 9:29 AM