Zanussi zwh7120 p 用户手册

Delay Start Button 

(continues)

The above options must be selected after choosing the 
wash program with the dial, and before pressing the 
Start/Pause button.

If after having set the delay start option (and pressed 
Start/Pause button) and you wish the cancel it, 
follow the below steps:

set the washing machine to PAUSE by pressing the 
Start/Pause  button;

deselect the Delay start  option, changing the status;

press the Start/Pause button to start the program.

The selected delay can be changed only after selecting 
the washing program again.

The door will lock through out the delay time.

If you need to open the door, you must first set the 
washing machine to PAUSE by pressing the Start/Pause 
button, after that you need to wait about 2-3 minutes to 
release door lock, the 

Door Lock (       )  pilot light is 

flashing to show the door release is in process, pilot light 
switch off when the door can be opened.

Important! 

The “Child Lock” feature will allow you to lock the controls 
while the machine is running to prevent tampering.

ACTIVATE “Child Lock” by pressing the 

“Temperature”

and

 “Spin”  buttons about 3 seconds, the padlock 

symbol “      ” is displayed on the screen. 

To DE-ACTIVE “Child Lock” simply press the 

“Temperature” 

and

 “Spin” buttons about 3 seconds, the “      ”padlock  

symbol in the screen will disappear.

Child Lock will remain activated until you de-activate it, even 
if the machine is turned off.

Child Lock Option (       )

Acoustic Signals Option

The machine is provided of an acoustic device, which 
sounds in the following cases:

By pressing the

 “Rinse Hold” and “Super Quick” buttons 

simultaneously for about 3 seconds, the acoustic signal is 
deactivated (except for the events of operating problems). 
By pressing these 2 buttons again, the acoustic signal is 
reactivated.

when selecting a wash program
when depressing the options buttons
at the end of the cycle
in the event of operating problems