Zanussi zwh7120 p 用户手册

Unpacking

All transit bolts and packing must be 
removed before using the appliance.

You are advised to keep all transit devices so 
that they can be refitted if the machine ever has 
to be transported again.

Using a spanner 
unscrew and 
remove the two 
rear bottom 
screws. 

Slide out the two 
plastic pins.

Lay the machine on its back ensuring that 
the hoses are not crushed. 
Place one of the 
polystyrene angle 
packings under 
the machine. 

Cover all the open 
holes with the 
plugs which you 
can find in the 
bag containing 
the instruction 
booklet.

Remove the 
polystyrene block 
(A) protecting the 
motor.

Important!

Some models are provided with a bottom 
cover that will be found inside the washing 
machine drum. 
After ensuring the 
polyethylene bags 
have been 
removed, follow 
below instruction:

Locate the bottom cover as shown in 
position (C).

(1). 

Then push the top end to lock to the 
bottom of washing machine.

(2). 

Very carefully 
remove the front 
polystyrene block 
(B) by gently 
pulling the 
polyethylene bag 
(1) downwards 
then (2) out, 
ensuring not to 
tear the bag.

Remove the polystyrene base, set the 
machine upright and unscrew the remaining 
rear screw. Slide 
out the relevant 
pin.