Kompernass tronic kh 967 universal battery charger with timer function 用户手册

d) Charging batteries
If you have inserted the batteries the right way up, 

as described at paragraph a) ...

 move the switch to the center, to the position with 

the "Charge" symbol, and ...

• connect the power plug to the power socket.
 If all batteries have been placed correctly, the  charge

lights up at each charging slot.

If a charge indicator LED is not lit, even 

though the battery has been correctly inserted, 

then the battery is faulty.
Do not, in any circumstances, attempt to charge 
a faulty battery. 

A faulty battery can overheat and 

then explode.

• Only charge with the cover closed. This will provide

sufficient protection against flying battery parts in the

event of an explosion due to overheating.

6

c) Discharge NiCd batteries first
NiCd batteries that are not fully discharged should be

discharged first, to avoid the possibility of "memory

effects".

 If you have inserted up to 4 NiCd batteries, 

move the switch to the far right, to the position 

with the "Discharge" symbol.

• Connect the power plug to the power socket.
 Allow the NiCd batteries to discharge until the 

is barely lit, meanwhile testing 

the batteries a few times.

Do not allow NiCd batteries to become 

completely discharged, as this may ruin them. 

Therefore, do not allow the batteries to discharge until 

the test indicator light goes off completely.
The Discharge feature is only available at the four charging

slots for 1.2 V batteries – not for 9 V batteries.

KH967_IB_Akku_Charger_UK.qxd  07.04.2004  11:52 Uhr  Seite 6