KiSS dp-1000 用户手册

STEP 
This function not used

AUDIO 
Press the (AUDIO) button to change the sound format. 
The audio format options, such as two-channel stereo 
and six-channel surround, are determined by the film 
producer.

ZOOM
When watching the film, you can zoom in on specific 
areas. You can zoom in either as the film is playing 
or after you have paused it. Activate the function by 
pressing the (ZOOM) button, and return to the normal 
picture by pressing the button again.
TIP: Use the arrow buttons to move around the enlarged 
screen display.

REPEAT
As the film is playing, press the (REPEAT) button and 
three options will appear on the screen.

MODE: Shuffle (random chapter playing) or Off 
(deactivated). Repeat: Lets you decide whether to repeat 
the section or the entire film.

CLEAR 
Use this function to delete all previous inputs.

SRCH
Use (SRCH) to find a specific spot on the disk.
Time: Specify time, minutes and seconds
Title/Chapter: Find the title or the chapter

ANGLE 
If the film supports more than one camera angle, you 
can switch from one angle to another by pressing the 
(ANGLE) button.

SUBPIC
Use this button to change the film’s subtitles. If you 
press the (SUBPIC) button, a message will appear in the 
top left corner of the screen indicating the number of 
available languages and the language that is currently 
active. If you press the (SUBPIC) button again, you go to 
the next language option. The number of languages is 
also determined by the film’s producer.

SETUP
If the DVD Player is in the process of showing a film 
or playing music, press the (SETUP) button to see the 

available options on the disk. For instance, if you are 
watching a DVD film, the left-hand side of the screen 
will show information about the film’s length, the 
number of chapters, the language options and the 
number of subtitles.

If the DVD player is turned on, but not playing films 
or other media, pressing this button will take you to a 
menu, where you can configure your DVD player. Here 
you can select the default settings for language, sound, 
video, parental level, etc.

These buttons are used for increasing and decreasing the 
sound volume.

MARK 
This function not used

Remote control

Power Cable 

Audio Cable

Scart Cable

Composite Video

Batteries 

for the remote control [size “AAA” (R6P)]

DVD-Player KiSS DP-1000

Connecting your KiSS DP-1000 DVD player to your TV can be done with any of the cables below. (Only one cable can 
be connected at a time).

  1. RGB via SCART 
  2. S-Video (the cable is an extra accessory)
  3. Composite via SCART
  4. Composite Video
  5. Component Video (the cable is an extra accessory)

Connecting your KiSS DP-1000 DVD player to your amplifier can be done with any of the cables below. (Only one cable 
can be connected at a time).

  6. Optical output (the cable is an extra accessory)
  7. Coaxial output (the cable is an extra accessory)
  8. Analogue Stereo

1. AC 

Input

2.  Coaxial Output for Amplifi er
3.  Optical Output for Amplifi er
4.  Ordinary Stereo Output
5.  S-Video Output for TV set
6.  Component Video for TV set
7.  SCART for TV set

1. Standby
2. Open/Close
3.   Title/Menu
4. Menu
5. Back
6. Up 

Arrow

7. Left 

Arrow

8. Enter
9. Right 

Arrow

10. Down Arrow
11. Rewind
12. Play/Pause
13. Fast Forward
14. Previous Chapter
15. Stop
16. Next Chapter
17. Select Lang/Audio
18. Next Picture
19. Select Subtitles
20. Select Angle
21. Zoom
22. Repeat
23. Unused
24. Setup
25. Clear Input
26. Search
27. Increase Volume
28. Decrease Volume

1. Display
2. CD 

Tray

3. Eject/Stop
4. Play/Pause

If your DVD Player is correctly connected (see the chapter 
on cable connections), a menu will appear when you turn 
on the DVD Player. The menu installs the most important 
settings for your TV set and language.

Select the language that will be used whenever you open the 
DP-1000’s built-in menus. Use the arrow buttons on the remote 
control to move the rectangular frame to the language you wish 
to select and press ENTER.

Select your TV set’s connection. Your options are SCART, S-Video 
and Component Video. The connection depends on the inlets 
available on your TV set. (If you select SCART, this connection 
also includes VGA and Composite Video).

This screen presents two different types of TV formats: 
4:3 (normal) or 16:9 (wide screen).  
Note: Some 4:3 TV screens can display 16:9 format.

If your TV set is connected via SCART, your TV is automatically 
provided with sound. If you would rather use an amplifier to 
reproduce the sound, you have two options to choose from: the 
phono jack or one of the two digital outputs. 
Note: The default Audio choice should be stereo unless your 
player is connected to a digital amplifi er

You can always access the Setup menu and adjust the 
DP-1000 to your specific requirements and hardware. 
When DP-1000 appears on the main screen, press the 
SETUP button on your remote control, and a menu will 
appear with the available options. The orange frame 
shows your position on the menu. Use the arrow buttons 
to move the frame and select by pressing the ENTER 
button. The settings on some of the menus have already 
been determined under Quick setup, but there are several 
settings available under Advanced setup as well.

The first menu is the Language settings menu. Here you select 
the language you wish to use for the menus, that will appear on 
the screen, and your preferred language when playing a DVD film 
– for subtitles, speech and menus (they will only be used if the 
film supports the language).

You can also select a different TV system from PAL (the European 
standard), and you can indicate whether you have RGB via 
SCART, Component or S-Video. Refer to your TV set’s instruction 
manual before selecting the connection. Only one setting at a 
time is possible.
Note: Composite Video via SCART is always activated.

This menu enables you to select either RAW or PCM. 
PCM: Stereo sound. Used for slightly older amplifiers. Choose 
this option to obtain analogue sound.
RAW: Plays the surround sound track on the disk. Recommended 
as default.

This display lets you set your preferred level of protection on 
the films. Some films are divided into levels, so that parents 
can prevent their children from seeing a specific type of film. In 
the next menu item, you create a password that is required for 
editing this setup*. The light in the DVD Player’s display can be 
modified from dim to normal or bright. All settings can be reset 
in the “Restore settings” menu, and the Quick setup can be re-
initiated from the last menu. *If you wish to modify this setup 
later on, you must re-enter the password.

The DVD Player supports the following media: DVD Video, DivX, XviD, ISO MPEG-4, Audio CD, MP3, Ogg Vorbis 
and jpeg.

DVD films are normally supplied with a regional code (1), 
(2), etc., and can only be played on DVD players with the 
same regional code. You can see the region on the back of 
the player. Region tags appear as follows:

If you have adjusted your DVD Player according 
to the instructions above, you can now insert a 
DVD into your DVD Player. A moment later, the 
DVD menu will appear. Use the arrow buttons 
to navigate in the menu and start the film.  
Note: As this menu is part of the DVD itself, it 
will vary from DVD to DVD.  

The DP-1000 recognises the format and 
automatically starts playing the CD when you 
insert it into the drive. Use the counter in the 
display to help you to see where you are in the 
film. You have access to the usual playback 
options, such as stop, pause, go to next, time 
search, etc. 

When you insert an audio CD with MP3 
or Ogg Vorbis music files, the player will 
automatically recognise the format and let 
you select the songs you wish to hear. You 
can choose the order in which you want 
to listen to the tracks, listen to just a few 
songs/albums/folders or play them at random 
by pressing the SETUP button on your remote 
control and selecting the preferred method for 
the playing order.

You can either have your photos burned 
on a disk in the shop, where you had them 
developed or burn your own disk on your 
computer. Afterwards the photos can be 
shown on your TV to the delight of your family 
and friends. You select whether the photos 
should be shown one by one in the order you 
prefer or as a slide show. Press SETUP to select 
slide show.

A number of advanced functions are located on the 
lower section of the remote control. These functions are 
described below. Some functions may not work with all 
media formats.

Updates 
At our website, you can update the DVD Player’s firmware/operating 
system with the latest new features.  To do so, download the 
software from the support section at the www.kiss-technology.com 
website. Then burn it on a CD-R and load it into the DVD player. See 
our website under support for additional information. If you do not 
have Internet access, or do not own or have access to a CD burner, 
an update can be purchased from the dealer where you purchased 
your DVD Player. To reset the settings of the DP-1000, press the 
following buttons on the remote control: “Open”, “Clear”, “1”, “2”, 
“3”. KiSS Technology A/S reserves the right to change all settings 
and specifications without notice.

Important safety information
•Read these instructions carefully and pay attention to all warnings 
and guidelines.
•Do not overload electrical sockets or extension cables. Overloading 
can result in fire or electric shock.
•Never insert objects into the DVD player’s cabinet door. They might 
come into contact with dangerous voltage points or short-circuit 
components, which can cause fire or electric shock. 
•Do not spill liquids on the DVD player.
•If the DVD Player does not function normally, or if it emits unusual 
sounds or odours, pull out the plug immediately and contact an 
authorised technician.
•Do not attempt to service the DVD player yourself. If you open or 
dismantle the shielding, you expose yourself to dangerous voltage 
and other hazards. All maintenance must be carried out by qualified 
service technicians. 

•  The system is made of recyclable materials which can be reused 

if disassembled by authorised personnel.

•  Please follow local regulations for the disposal of packaging    

materials, used batteries and discarded units.

Copyright 
This product contains copyright technology which is protected 
pursuant to the patents that are the property of Macrovision 
Corporation and other copyright holders. Any use of this copyright 
technology must be approved by Macrovision Corporation. The 
technology is intended for use in the home unless otherwise 
approved by Macrovision Corporation. Breakdown and disassembly 
are prohibited. 
Made under license from Dolby Laboratories. “Dolby” and the double 
“D” symbol are trademarks of Dolby Laboratories. “DTS” and “DTS 
Digital Out” are trademarks of Digital Theater Systems, Inc.

KiSS Instant Repair Service
If the DVD player is STILL UNDER WARRANTY, KiSS Technology A/S 
will pay freight costs back and forth to the customer. Please follow 
the instructions given by the HelpDesk. Always remember to write 
the RMA number (provided by the HelpDesk) on the freight bill. If 
the DVD player is NOT UNDER WARRANTY, all costs must be held 
by the customer.
There are three ways to obtain an RMA number. “An RMA 
number is a reference number generated in every single case for 
administrative purposes.” 

1.By fax or e-mail: Fax: +45 44 78 41 48 and e-mail: 
kiss@esupport.dk. Enclose the error description, serial no., invoice 
no., copy of the invoice/sales receipt.
2.Personal contact: Phone KiSS’s Help Desk on +45 70 26 82 70 and 
request an RMA number. 

3.From the dealer: take the product to the dealer, where it was 
purchased. Important: Never send the product to be repaired 
without obtaining an RMA no. first, otherwise it will be rejected. 
The product must always be packed properly, otherwise the product 
warranty will be discontinued. (Packaging can be purchased from 
KiSS Technology at the market price). Retrieval and delivery to the 
end user. The product can be picked up from and delivered directly 
to the end user. To do so, the end user must follow the HelpDesk’s 
instructions at the time of the RMA enquiry. If these instructions 
are not followed, the end user will be charged for extra costs that 
must be paid on delivery.

Warranty certificate
KiSS Technology A/S provides a twenty-four (24) month warranty 
from the date of purchase against material and manufacturing 
defects. In the event of defects covered by the warranty, the product 
must be returned to the dealer that sold the product, or refer to the 
enclosed appendix on the KiSS Instant Repair Service. The expected 
time of repair, including transport, is approximately five working 
days (except for remote areas). If any problems arise, information on 
our authorised service centres is available at the following address, 
or from the dealer who sold the product.

Terms of Warranty
1.The warranty is only valid on presentation of a correctly completed 
warranty certificate and sales ticket, and if the serial number on the 
product is fully legible.
2.The obligations of KiSS Technology are limited either to repair or 
replacement of defective components. The repair or replacement 
of defective components is based on an assessment by KiSS 
Technology. Exchange is only possible if the repair cannot be 
performed.
3.Warranty repairs must be performed by an authorised KiSS 
Technology dealer, or an authorised service centre. No remuneration 
is provided for repairs performed by unauthorised workshops. 
Any repairs or damage to the product caused by unauthorised 
intervention are not covered by this warranty.
4.This product will not be viewed as defective, either in materials 
or in manufacture, if adaptation to national, local, technical or 
safety-related requirements is required in countries other than the 
specific country for which the product was originally designed and 
manufactured.
5.This warranty does not cover these types of adaptations, and 
no remuneration will be offered for these types of adaptations or 
for any consequential damages. The warranty does not cover the 
following:
a) Periodic inspection, maintenance and repair or replacement of 
parts resulting from normal wear.
b) Costs connected to transport, disassembly or installation of the 
product.
c) Misuse, including use for other purposes than was intended, or 
faulty installation.
d) Damage caused by lightning, water, fire, natural catastrophes, 
war, insurrection, incorrect line voltage, insufficient ventilation or 
other causes beyond the control of KiSS Technology.
6.This warranty applies to every legal owner of the product during 
the warranty period.
7. Information we must receive before repairing the product: model 
name, serial no, RMA no, copy of the invoice or sales receipt
the dealer’s name, address and phone no, personal information 
(Name, address, post code/city, phone no. and e-mail address 
(optional)), your signature, dealer’s stamp and signature, date.

The DVD Player is equipped with a VFD display which indicates 
the current ongoing activities.

1.  Indicates the selection of the disk being played
2.  Indicates the number or chapter being shown/played
3.  Indicates the current function, such as play or stop
4.  Indicates the type of media being played