Ideal nd2354 用户手册

1

2

5

3

4

WARNING!
1. DO NOT UNDER ANY CIRCUMSTANCES EXCEED THESE RATINGS:

- 500VAC phase-neutral
- 866VAC phase-phase

2. To avoid electrical shock hazards and/or damage to the meter:

- Do not exceed the voltage ratings for the meter.  - Use caution when measuring voltage.
- Do not use during electrical storms.  Electrical storms may result in high voltage.  High-energy transients can 

damage meter and present a dangerous shock hazard.

3. Ensure meter is in proper working order before using.  Visually inspect meter for damage.  
4. Never ground yourself when taking electrical measurements.  Do not touch exposed metal pipes, outlets, fixtures etc.

Keep your body isolated from ground by using dry clothing, rubber shoes, mats, or any other approved insulating
material.  Keep your fingers behind the finger guards on the probes.  Work with others.

5. Before breaking a circuit for testing, turn off the power to the circuit. When disconnecting from a circuit, disconnect

the hot lead first, then the common lead.

6. Disconnect the meter from the circuit before turning off any inductor, including motors, transformers, and solenoids.