rototherm sentry digital panel indicator setup guide 用户手册
20-5110 Issue B
11
b)
Editing a Value
Other parameters are changed by editing a value (eg. the
parameter
parameter
HdSP
has a default numeric value of [
100.0
]).
Press the Next
Key to edit the flashing digit and the
Enter
Key to select the next digit for editing.
The following example will show you how to edit a numeric
value. We will change the high display value (labelled
value. We will change the high display value (labelled
HdSP
).
•
With the unit displaying the measured value, press and
hold down the Enter Key for approximately 3 seconds
until the display begins to flash.
hold down the Enter Key for approximately 3 seconds
until the display begins to flash.
•
Press the Next Key and the flashing display should be
replaced with the message
replaced with the message
inPt
(the first menu parameter).
•
Press the Next Key repeatedly until
HdSP
is displayed.
•
Press the Enter Key and
100.0
will be displayed (with the
least significant digit flashing).
•
Press the Next Key to scroll through digit values
0
to
9
and edit the least significant digit.
•
To move to the next most significant digit, press the
Enter
Enter
Key and the digit will flash.
•
Repeat the previous 2 steps until the left most significant
digit is flashing.
digit is flashing.
•
Press the Next Key to scroll through digit values
-1
, - and
0
to
9
.
•
If the value allows the
dP
position to be moved, the
dP
will flash. To move the
dP
position, use the Next Key.
•
Press the Enter Key to save this value and exit. When the
Enter Key is pressed and the left most significant digit is
flashing, the display will return to the menu parameter, ie.
Enter Key is pressed and the left most significant digit is
flashing, the display will return to the menu parameter, ie.
HdSP
.
•
Press the Next Key repeatedly to scroll through the rest of
the menu parameters until the measured value display is
restored.
the menu parameters until the measured value display is
restored.
Sentry Digital Panel Indicator
Setup Guide