lift-master tcr1 用户手册
© 2000, The Chamberlain Group, Inc.
01-16700C
All Rights Reserved
Step 5 Power Supply Connections
The receiver is connected to the opener via external
screw terminals labeled 1, 2 and 3 (Refer to figure 5).
The receiver is connected to the opener via external
screw terminals labeled 1, 2 and 3 (Refer to figure 5).
TERMINAL 1 = COMMON
TERMINAL 2 = OUTPUT RELAY
TERMINAL 3 = POWER INPUT
TERMINAL 2 = OUTPUT RELAY
TERMINAL 3 = POWER INPUT
If the three terminals allign with three matching
terminals on the operator, use the piggyback clips for
screw to screw attachment. If spacing is different or
not marked, use the wiring diagram in Figure 5.
terminals on the operator, use the piggyback clips for
screw to screw attachment. If spacing is different or
not marked, use the wiring diagram in Figure 5.
FIGURE 5
POWER CONNECTIONS