jetway p4845geb1a 用户手册

 
 
 
                                                                                                                                                                                                                                                                                                                                                

 
 
 

 

Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the 
CPU itself uses when communicating with its own special components. This section covers 
some very technical items and it is strongly recommended that only experienced users should 
make any changes to the default settings. 

   

 

 

 

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

Reset Configuration Data 
Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration 
Data (ESCD) when you exit Setup if you have installed a new add-on and the system 
reconfiguration has caused such a serious conflict that the operating system can not boot.  The 
settings are: Enabled and Disabled. 

Resource Controlled By 
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot and 
Plug and Play compatible devices.  However, this capability means absolutely nothing unless 
you are using a Plug and Play operating system such as Windows



95/98.  If you set this field 

to “manual” choose specific resources by going into each of the sub menu that follows this 
field (a sub menu is preceded by a “>”). 
The settings are: Auto(ESCD), Manual. 

IRQ Resources 
When resources are controlled manually, assign each system interrupt a type, depending on 
the type of device using the interrupt. 
Please refer to section 3-9-1 

PCI/VGA Palette Snoop 
Leave this field at Disabled.  The settings are Enabled, Disabled.