mulholland movita junior 用户手册
Manufacturer: elmi GmbH - Handwerkerzone 25 - I-39052 Kaltern - Tel 0471 961002 - FAX 0471 962374 elmisrl@tin.it -
Movita
junior
User manual
These operating instructions contain information, settings, safety precautions, which are to be considered with the use of Movita
junior, as well as other important data. Movita junior are not to be used on diagonal and uneven ground.
junior, as well as other important data. Movita junior are not to be used on diagonal and uneven ground.
Movita junior are walking aids for children starting with age 7 and for adult body size from approx. 120 cm to 200 cm.
Movita is directed mainly towards walk-obstructed people who, without support, cannot keep themselves upright.
Movita is directed mainly towards walk-obstructed people who, without support, cannot keep themselves upright.
Movita can be adapted individually to the needs of the user. The thoracic support holds the upper body in an upright position and
gives the user security. The pelvic support holds the child on the seat, and the handle gives a relieved support for the arms. The
thoracic support and the pelvic support can be opened with a simple motion, thus makes the transfer particularly easy. Movita junior
can be used indoors and outdoors, thanks to the large wheels.
gives the user security. The pelvic support holds the child on the seat, and the handle gives a relieved support for the arms. The
thoracic support and the pelvic support can be opened with a simple motion, thus makes the transfer particularly easy. Movita junior
can be used indoors and outdoors, thanks to the large wheels.
Start-up
Movita junior will be delivered in two parts: the underframe with wheels and brakes and the upper section with seat and thoracic
support. Under the seat a hexagonal wrench is located (fig. 2).
support. Under the seat a hexagonal wrench is located (fig. 2).
Assembling upper section and underframe
Upper section needs to be put on top of the underframe.
Upper section needs to be put on top of the underframe.
Basic model adjustment
Height of the thoracic support and seat
For height adjustment of the thoracic support, loosen the two bottom handles (fig. 3). Once the desired height has been reached, the
handles need to be tightened whereby the same height can be adjusted on both sides with the help of the height framework.
For height adjustment of the thoracic support, loosen the two bottom handles (fig. 3). Once the desired height has been reached, the
handles need to be tightened whereby the same height can be adjusted on both sides with the help of the height framework.
The seat height can be adjusted by loosening both upper handles (fig. 4). Once the desired height has been achieved both handles
need to be tightened, whereby with the help of the height framework the exact height can be adjusted.
need to be tightened, whereby with the help of the height framework the exact height can be adjusted.
Thoracic support
The thoracic support can be opened or closed through lightly raising or down-pressing the padded pipe (fig. 6).
The thoracic support can be opened or closed through lightly raising or down-pressing the padded pipe (fig. 6).
Springs
The two springs in the lower pipes can be exchanged, if a harder or softer suspension is needed (fig. 5). The springs are available in
four different levels of stiffness, which are appropriate for the following body weights 20 kg - 40 kg -60 kg -80 kg.
The two springs in the lower pipes can be exchanged, if a harder or softer suspension is needed (fig. 5). The springs are available in
four different levels of stiffness, which are appropriate for the following body weights 20 kg - 40 kg -60 kg -80 kg.
Seat
The seat can be pushed back and forward. Loosen the large screw under the seat attachment pipe (fig. 6). If the desired position is
found the screw needs again to be tightened. In addition also the angle of the seat can be adjusted again by loosening the two
internal hexagonal screws under the seat (fig. 6). After adjusting, the screws are tightened again.
The seat can be pushed back and forward. Loosen the large screw under the seat attachment pipe (fig. 6). If the desired position is
found the screw needs again to be tightened. In addition also the angle of the seat can be adjusted again by loosening the two
internal hexagonal screws under the seat (fig. 6). After adjusting, the screws are tightened again.