RadioShack pro-96 用户手册

 

 

66

To review all locked out channels, press MAN, then repeatedly press FUNC then L/OUT. 

The scanner will advance to the next locked out channel each time you press FUNC, 

then L/OUT.   

To lock out a frequency during a search, press L/OUT when the scanner stops on that 

frequency. The scanner will lock out the frequency and continues searching. 

 

Notes 

• 

You can lock out as many as 50 frequencies in each search bank. If you try to lock 

out more, Memory Full! will appear in the display, and you will be unable to lock out 

any more frequencies until some have been cleared. See “Clearing a Locked-Out 

Frequency” below. 

• 

If you lock out all frequencies in one search bank and only this search bank is 

activated, All ranges Locked out! appears in the display and the scanner  will not 

search. 

To review the frequencies within a search bank that you locked out: 

1.  Press SRCH to set search mode, and select the desired search bank to review its 

locked out frequencies. 

2.  Press FUNC then L/OUT. The last locked-out frequency and Lockout list appear. 

Press 

π

 or 

θ

 to scroll through the list. The locked-out number and the total locked-out 

number also appears as  L/O XX of YY. (The tenth of  twenty five locked out 

frequencies would appear as L/O 10 of 25). If the search bank has no locked-out 

frequencies, Empty. Lockout List appears in the scanner’s display. Press SRCH 

to cancel reviewing locked-out frequencies.