UMAX mirage ii 用户手册

vi

Note: If you already have a SCSI card installed on your computer:

When installing the software, you will be asked to choose TYPICAL or

CUSTOM installation. Choose CUSTOM and select “Adaptec or other ASPI

Compatible Interface Card” when installing the scanner driver. Otherwise, the

scanner will not work properly.

Connect the SCSI cable to the SCSI interface card and the other end of the SCSI

cable to the scanner.

If your scanner is not chained to other SCSI devices or at the end of the SCSI chain,

please connect the terminator to the remaining SCSI port of your scanner.

Connect the appropriate end of the power cord to the scanner and the other end to a

grounded power outlet. When you turn the scanner on, it will automatically perform

a power-on selftest. When the selftest is completed, the power and ready indicators

glow steadily .

a)  Turn the scanner power switch on. When the Ready indicator is on, your

scanner is ready to use.

b)  Turn on your computer.

 

To an outlet

Connect the SCSI Cable

Power Switch