Pentax K-500 操作指南

285

Ap

pen
di

x

10

Troubleshooting

In rare cases, the camera may not operate correctly due to static 

electricity. This can be remedied by taking the battery out and putting it 

back in again. After these procedures are done, if the camera operates 

correctly, it does not require any repairs. 

We recommend checking the following items before contacting a service 

center. 

Problem

Cause

Remedy

The camera 

does not turn 

on

Battery is not 

installed

Check if a battery is installed. 

Battery is not 

installed properly

Check the orientation of battery. Re-insert 

battery according to the +/- symbols. 

The battery power 

is low

Replace with a charged battery or use 

the optional AC adapter kit. 

The shutter 

cannot be 

released

The built-in flash 

is charging

E

 blinks while the built-in flash is 

charging. Wait until charging is finished. 

There is no 

available space on 

the SD Memory 

Card

Insert an SD Memory Card with available 

space or delete unwanted images. (p.75, 

Recording

Wait until recording is finished. 

The lens aperture 

ring is set to a 

position other 

than s

Set the lens aperture ring to the s 

position or select [Enable] in 

[20. Using Aperture Ring] of the 

[A Custom Setting 3] menu. (p.276)

K-500.book  Page 285  Friday, June 14, 2013  2:29 PM