Pentax GR Limited Edition 操作指南
6
A
ppendic
es
136
Other Flash Units
1
Attach the flash unit to the hot shoe.
2
Turn on the camera, turn the mode dial to Av, TAv, or M, and set
the aperture.
3
Set the ISO sensitivity to a value other than [Auto] or [AUTO-HI].
4
Turn on the external flash, set it to Auto, and set the aperture
and ISO sensitivity to the same values on the camera.
Caution -------------------------------------------------------------------------------------------------------
• Use only flash units with one signal terminal, which must be an X-contact with a positive voltage of
no more than 20 V.
• A flash signal is output to the X-contact of the hot shoe regardless of the flash setting. Stop operation
of the flash unit from the flash unit itself.
• Exposure may not be appropriate even when the aperture and ISO sensitivity of the external flash are
the same as those of the camera. If so, change the aperture and ISO sensitivity of the flash.
• Use an external flash with a lighting angle that covers the angle of view of the shooting lens.