Panasonic sl-ct730 操作指南

下载
页码 6
1
1
G
SL-CT730
Dear Customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please read the 
instructions completely. Please keep this manual for future reference.
RQT8193-1B
F0905ST1095
Note: 
“EB” on the packaging indicates the United Kingdom.
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
SG
GC
EG
EB
GK
Troubleshooting guide 
No play.
p The HOLD function is on, stopping buttons from being 
operated. Cancel HOLD (
page 5).
p The batteries may be drained (page 4).
p The disc isn’t correctly set.
p The disc is scratched or dirty. (Tracks may be skipped 
particularly with MP3 discs.)
p There is moisture on the lens. Wait for about an hour and 
then try again.
p The lens is dirty: clean it with a blower (recommended product: 
SZZP1038C). You cannot use a CD type lens cleaner. If the lens gets 
marked with fingerprints, gently wipe them off with a cotton swab.
p Remove the plug and reinsert it as fully as possible.
p The unit may not read a track properly if shaken strongly 
during disc reading.
p If there is no data between sessions on a multi-session 
disc, play may not be possible.
p If there is a large amount of JPEG data etc. within a MP3 file, 
sound may become muted and play may not be possible.
p If the disc contains data with different formats, sound 
may stop being output or play may not be possible.
p  If a CD-ROM format disc contains MP3 and other files, 
only the MP3 files will be playable.
No sound or there is 
a lot of noise.
p Ensure the plugs are inserted firmly.
p Wipe the plugs with a clean cloth.
p The disc is scratched or dirty. 
p Sound interruption or noise may occur if the recording 
quality of the disc (CD-R/RW) is poor.
p The elapsed playing time disappears and sound is 
interrupted if bumps continue repeatedly.
Disc rotation stops 
and starts during play.
Disc rotation stops and starts to save power.
Operation sounds are 
heard from the unit.
There is some sound heard when a disc is being accessed 
or disc rotation starts.
Play doesn’t resume from 
the last point stopped.
p This doesn’t work during random play. 
p It may not work correctly under some conditions.
Play doesn’t start 
from the first track.
p Random play modes may be on (page 6).
p The resume function (above) is operating. If the lid 
is opened while stopped (while the power is ON) the 
resume function is cancelled. 
Cannot specify point 
A or B.
You may not be able to specify point A or B at the end of 
disc.
Cannot change the 
anti-skip mode.
If [
] or [] is pressed before [MEMO/DISP] 
you cannot change the mode.
Digital Re-master 
does not work.
Depending on the type of MP3 disc recording, the effect 
may not appear.
Cannot hear the remote 
control’s operation tone.
The remote control’s operation tone may be off (
page 5). 
The remote control 
does not work properly.
p Remove the plug and reinsert it as fully as possible.
p Use only the included remote control to operate this unit.
The remote control 
display does not light.
Remove the plug and reinsert it as fully as possible.
Cannot recharge.
p Use the specified or supplied nickel-metal hydride 
rechargeable batteries (HHF-AZ01/HHF-1P).
p You must insert two batteries before you can recharge them.
p The unit must be off before you can recharge.
The AC adaptor becomes 
warm during recharging.
This is normal.
The batteries are taking 
a long time to recharge.
The batteries may take as much as 6 hours to recharge 
under some conditions.
Play time is short 
after recharging.
p This may occur the first time you recharge the batteries 
or if you haven’t used them for a long time. Play time 
should be restored after a few recharges.
p The batteries are drained if you leave the AC adaptor 
connected after recharging is complete.
p If play is extremely short even after fully recharging the 
batteries, the batteries may have exceeded their life. 
(Rechargeable batteries can be recharged approximately 
300 times.) Please purchase new nickel-metal hydride 
rechargeable batteries (HHF-AZ01/HHF-1P).
The battery indicator 
fails to appear or is 
incorrect.
p The indicator does not appear when the AC adaptor is connected.
p The indicator may not appear correctly when using the 
rechargeable and dry cell batteries at the same time and 
under certain conditions.
The unit stops working. Disconnect then reconnect all power sources (batteries and AC adaptor).
Power cuts off.
If you connect or disconnect the AC adaptor, the power 
cuts off even if batteries are inserted.
Before requesting service, make the following checks. If you are in doubt about some of the check points, 
or if the solutions indicated in the chart do not solve the problem, consult your dealer for instructions. 
Operating Instructions
Portable CD Player
HOLD (Function lock)
The hold function stops the buttons from being operated. By keeping the hold 
function on, you can stop the power from being switched on, play from being 
stopped and other operations from being done by mistake. 
p The unit and remote control each have independent HOLD switches.
Resume function
Play resumes from where last stopped. [If the lid is opened while stopped (while 
the power is ON) the resume function is cancelled. The resume function is also 
cancelled when the disc is changed.]
Extended play
You can get extended play time by inserting dry cell batteries into the external 
battery case, attaching it to the main unit and using the rechargeable and dry 
cell batteries together.
Discs that can be played
CD-R/RW
MP3
CD-DA
WMA
WMA
WMA
Commercially 
available music CD 
(CD-DA)
WMA cannot 
be played
RQT8193-1B.indd   1
RQT8193-1B.indd   1
2005/10/11   20:29:43
2005/10/11   20:29:43