Panasonic SH-FX70 操作指南
11
Sa
fety pre
cau
tio
n
s
/ T
rou
bl
es
ho
oti
n
g
g
u
id
e
11
RQTX
01
72
EN
G
L
IS
H
Safety precautions
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components,
thereby shortening the unit’s service life.
Do not place heavy items on the unit.
Do not use high voltage power sources. This can overload the
unit and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other places where DC is used.
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock
or malfunction. If this occurs, immediately disconnect the unit
from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is
not covered in these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorized service center.
Electric shock or damage to the unit can occur if the unit is
repaired, disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Placement
Voltage
AC mains lead protection
Foreign matter
Service
Troubleshooting guide
Before requesting service, make the following checks. If you are
in doubt about some of the check points, or if the solutions
indicated in the table do not solve the problem, consult your
dealer for instructions.
in doubt about some of the check points, or if the solutions
indicated in the table do not solve the problem, consult your
dealer for instructions.
Main unit
On your home theater unit
No power.
≥Ensure the AC mains lead is connected
properly.
The indicator
does not turn
green even
though [I/D SET]
is pressed and
completed the
pairing.
does not turn
green even
though [I/D SET]
is pressed and
completed the
pairing.
≥Turn the wireless system off and then
back on.
The wireless link
indicator
(e.g. “ [W1] ” or
indicator
(e.g. “ [W1] ” or
an indicator) is
flashing.
flashing.
≥There is no link between the home
theater unit and the wireless system.
Turn the wireless system off and then
back on. Alternatively, turn the wireless
system off, disconnect the AC mains
lead, and then reconnect it.
Turn the wireless system off and then
back on. Alternatively, turn the wireless
system off, disconnect the AC mains
lead, and then reconnect it.
The wireless link
indicator
(e.g. “ [W1] ” or
indicator
(e.g. “ [W1] ” or
an indicator)
does not light.
does not light.
≥Check that the home theater unit is
turned on, and the wireless system is
turned on.
turned on.
≥Ensure that the digital transmitter is fully
inserted into the slot of the home theater
unit.
unit.
≥Ensure the surround sound setting on the
home theater unit.
SH-FX70_RQTX0172-B_En.book Page 11 Tuesday, December 9, 2008 12:35 PM