Panasonic KXHNC210 操作指南
Wall mounting
R Mount the camera on the stable location
where the unit can be adequately
supported when installing.
supported when installing.
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
R Do not mount the camera on a soft
material. It may fall down, break or cause
injury.
injury.
R Do not mount the camera on the following
places: plaster board, ALC (autoclaved
lightweight cellular concrete), concrete
block, plywood less than 25 mm (1 inch)
thick, and etc.
lightweight cellular concrete), concrete
block, plywood less than 25 mm (1 inch)
thick, and etc.
1
Drive the screws (not supplied) into the
wall.
wall.
1
Longer than 20 mm (25/32 inches)
2
Space 1.3 mm (1/32 inches)
1
2
Note:
R Use the following template when
R Use the following template when
determining the location of the screw
holes.
holes.
(1 3/32 inches)
28 mm
2
Mount the camera to the wall.
1
Screws
2
28 mm (1 3/32 inches)
2
1
3
Adjust the angle of the camera.
For assistance, please visit http://shop.panasonic.com/support
11
Setup
HNC200_(en_en)_1005_ver.210.pdf 11
2015/10/06 13:23:03