Panasonic KITE15JKE3 操作指南

•  For AUTO, the indoor fan speed is automatically 

adjusted according to the operation mode.

•  Keeps the room ventilated.

•  If AUTO is set, the louvers swing up/down 

automatically.

•  In heat mode, the air blows horizontally for a while, 

then starts to blow downwards.

•  Generates negative ions to produce fresh air effect 

and attract dust which will then be captured at the 

positively charged e-ion fi lters.

•  Patrol sensor detects air quality.

•  When the air quality is unsatisfactory, e-ion operation 

will start automatically.

•  This operation reduces air dryness and provides you 

with a comfortable living environment.

•  When vertical airfl ow direction is set to AUTO, it stops 

at lower position to avoid cold air contact. However, 

you can adjust the louver direction manually.

•  This operation reduces airfl ow noise.

• 

, 

, 

 and 

 can be activated 

in all modes and can be cancelled by pressing the 

respective button again.

• 

 only can be activated in COOL mode and can 

be cancelled by pressing the button again.

• 

 and 

 or 

, 

 and 

 can 

not be selected at the same time.

• 

 and 

 can be activated even when the 

unit is turned off. In this condition, fan speed and air 

swing can not be adjusted.

Patrol starts automatically with the unit 
switched on with 

.

Press and hold for 5 seconds, then release 
to disable or restore this setting.

Press and hold for 5 seconds to dim or 
restore the unit’s indicator brightness.

Press and hold for approximately 10 
seconds to show temperature setting in °C 
or °F.

Press and hold for approximately 5 seconds 
to show 12-hour (am/pm) or 24-hour time 
indication.

 

Press to restore the remote control’s default 

setting.

 

, 

  Not used in normal operations.

Use curtains to screen off sunlight and outdoor heat to 
reduce power consumption during cool mode.

•  To turn ON or OFF the unit at a preset time.

•  To cancel ON or OFF timer, press 

 or 

 then 

press 

.

•  When ON Timer is set, the unit may start earlier (up 

to 35 minutes) before the actual set time in order to 
achieve the desired temperature on time.

•  Timer operation is based on the clock set in the remote 

control and repeats daily once set. For clock setting, 
please refer to Remote Control Preparation at back 
cover.

•  If timer is cancelled manually or due to power failure, 

you can restore the previous setting (once power is 
resumed) by pressing 

.