Panasonic KXTG6751FX 操作指南

5

The unit does not work.

L

When the indicators do not light, the AC adaptor is not 
connected properly. Check the connections.

L

When the indicators do not light green, move the unit closer to 
the base unit.

L

The repeater mode is “

”. Set the repeater mode to “

”.

L

Registration may have been cancelled.
Deregister the unit, then re-register.

Unplug the AC adaptor, then press and hold {PROGRAM}.

While pressing and holding {PROGRAM}, 
re-connect the AC adaptor.

Keep holding to press {PROGRAM} for about 10 seconds 
until the & indicator stops flashing and lights red. Then 
release {PROGRAM}. 
L

The & and w indicators light amber for a moment then 
only the & indicator flashes red.

L

If the & indicator flashes green after releasing 
{

PROGRAM}, deregistration failed. Deregister the unit 

again.

DECT repeater: Unplug the AC adaptor.

Base unit: Press and hold {x} for about 5 seconds.
(No registration tone)
L

The next step must be completed within 90 seconds.

DECT repeater: Connect the AC adaptor, then wait until the 
&

 indicator and w indicator light green.

Base unit: To exit the registration mode, press {x}.

While talking using the 
handset, sound cuts in and 
out.

L

The handset is out of range. Move the handset closer to this 
unit.

A repeating tone is heard 
while talking using the 
handset. 
or
The & indicator continues 
to light amber and the w 
indicator flashes green.

L {

PROGRAM} was pressed. The unit is in programming mode. 

To exit, press {PROGRAM} again. Do not press 
{

PROGRAM}, except when deregistering the unit.

TGA405EX(3lang)_for_FX.book  Page 5  Tuesday, September 11, 2012  10:10 AM