Panasonic NRB32SW2 操作指南

•  Drinks can be cooled quickly in the freezer.

•  This mode has a timer function, and can be set to beep when the timer reaches 5, 10, 

15, 20, 25 or 30 minutes.

•  Remove the bottles when the beep is heard. If bottles are left in the freezer for a long 

time, their contents could freeze and the bottles might break.

1. Press   (lower) button for 5 seconds.

2. “dc” is displayed on the Freezer temperature display and “05” flashes on the Fridge 

temperature display.

3. Press   (upper) to adjust the time (05-10-15-20-25-30 minutes).

4. The selected time flashes on the display 3 times and a beep will be heard.

5. Countdown by minutes starts from the set time, and the remaining time flashes on the 

display.

•  To release Drink Cool Mode, press   (lower) button for 5 seconds.

•  When the set time comes, a beep will be heard, and both of the display indication 

(Example: “00” and “dc”) flash until you press   (lower).

•  When using this mode, check the temperature of the bottles regularly.

•  When the bottles have cooled sufficiently, remove them from the freezer.

•  While setting this mode, the backlight of the display can be turned off to save energy.

1. Press   for 3 seconds to set the automatic Screen Saver function.

2. If no operation is performed for 5 seconds and any door is not opened, the backlight of 

the display is turned off with all other marks and characters remaining on the display.

•  The selected modes and functions are maintained.

•  To set the automatic Screen Saver to off and keep the backlight of the display on, press 

 for 3 seconds.

•  When the automatic Screen Saver function is set to on and the display backlight is 

turned off for a while, the display backlight will be turned on again and the set functions 

are indicated on the display, if any button is pressed or any door is opened.

•  When the Screen Saver and Child Lock are set to on, the Screen Saver is activated. 

Therefore, while both of the functions are activated, the display backlight will be turned 

on again when any button is pressed or any door is opened.

•  Setting Child Lock can keep children from changing the settings while playing with the 

buttons.

1. Press   (upper) and   (lower) for 5 seconds to set Child Lock.

•  While Child Lock is set,   is lit.

•  To release the mode, press   (upper) and   (lower) for 5 seconds. You cannot change 

the mode that is currently set until Child Lock is released.

•  If electricity is interrupted or the power plug is removed, Child Lock is released.