Panasonic SC-ZT2 操作指南

VQT2R71

„ Make sure that all equipment has been turned off.

(When the VIERA Link “HDAVI Control” compatible Panasonic TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are 
connected, do not turn on TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) until the setting is complete.)

„ Connect AC mains leads of main unit and 2 speakers to household mains sockets. 

(➜ page 14)

„ Make sure that the main unit and speakers have been turned off.
„ Prepare the remote control. (

➜ page 8)

• “

2CH SEARCH ” appears on the display.

  (This is displayed only at the first-time setting.)

•  The colour of [WIRELESS LINK] indicator changes from red to 

green.

•  When the [WIRELESS LINK] indicator of each speaker lights 

green, “

2CH SEARCH ” display disappears.

 

See “Installing surround speakers” (

➜ page 16) and “Setting 

surround speakers” (

➜ page 17).

3. Press and hold [CH] on the remote control about 3 seconds until “2 SPKR SET ” is 

 • 

 

Sound is output from either of the speakers.

 • 

 

When you press the button corresponding to the confi rmation sound of speaker, another speaker outputs confi rmation sound. 
Press the corresponding button in the same way and complete settings for all 2 speakers.

 • 

 

When “

COMPLETE ” disappears on the main unit’s display, the speaker setting is complete.

•  Check if the speakers are properly set after setting the speakers. (

➜ page 16)

•  If the speakers are set incorrectly in step 

4, turn the main unit off then on again and perform steps 3 and 4.

•  If [WIRELESS LINK] indicator does not change from red to green, see page 29 of “Troubleshooting guide”.

Press

[WIRELESS LINK] 
indicator

Press

WIRELESS LINK

Always aim the 
remote control at 
the main unit for 
operation.

Press and hold 
(about 3 seconds)

“

2 SPKR SET ”

When the sound is 
output from the front 
speaker (left), 
press [GAME].

When the sound is output 
from the front speaker 
(right), press [MUTE].

Front speaker 
(left)

Front speaker 
(right)