Panasonic KXTG8424E 操作指南

23

To turn this feature on, select “Caller ID”. To turn this feature off, select 
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 14).

*3 When the ringer volume is turned off, ~ is displayed and the handset does not ring 

for outside calls.
However even when the ringer volume is set to off, the handset rings:
– at the low level for memo alarm (page 24) and intercom calls (page 45)
– at the high level for paging (page 45)

*4 If you select one of the melody ringer tones, the ringer tone continues to play for 

several seconds even if the caller has already hung up. You may either hear a dial 
tone or no one on the line when you answer the call.

*5 The preset melodies in this product are used with permission of © 2007 

Copyrights Vision Inc.

*6 You can set the wallpaper to display with or without date and time. The default 

setting is with date and time displayed.

*7 “Handset Number”: Displays the handset number such as “[1]”.

“Base Number”: Displays the base unit number such as “-1-”.

*8 This feature allows the display to be dimmed after being placed on the base unit 

or charger.
– “On”: Backlight is dimmed.
– “Off”: Backlight turns off after 10 seconds of charging.

*9 Turn this feature off if you prefer not to hear key tones while you are dialling or 

pressing any keys, including confirmation tones and error tones.

*10If you subscribe to a Caller ID service and want to view the caller’s information 

after lifting up the handset to answer a call, turn off this feature.

*11To prevent other users from joining your conversations with outside callers, turn 

this feature on.

*12The recall/flash time depends on your telephone exchange or host PBX. Contact 

your PBX supplier if necessary.

TG8421E(e).book  Page 23  Tuesday, December 16, 2008  8:03 AM