Panasonic KXHNS107 操作指南
2
Tap [Wireless Access Point].
3
Select the wireless access point that you want to delete and then tap [Delete].
Note:
R You cannot delete the wireless access point that your mobile device is currently connected to.
R You cannot delete the wireless access point that your mobile device is currently connected to.
[Port Forwarding] settings
These settings are only required if you need to configure your wireless router’s port forwarding feature in
order to access the hub while away from home.
These settings are only required if you need to configure your wireless router’s port forwarding feature in
order to access the hub while away from home.
Important:
R In order to use this feature, you must first configure the hub to use a static IP address ( “Changing IP
R In order to use this feature, you must first configure the hub to use a static IP address ( “Changing IP
1
From the [Home Network] app home screen, tap [Settings].
2
Tap [Wi-Fi Settings].
3
Tap [Port Forwarding].
4
Turn on the [Enable] radio button.
5
Tap the field next to [Port A] and then enter the desired port number.
Repeat this step for [Port B] and [Port C].
R A value must be assigned to each port.
R Only port numbers 62000–63000 can be assigned.
R Configure your wireless router’s port forwarding feature to forward these ports to the static IP
Repeat this step for [Port B] and [Port C].
R A value must be assigned to each port.
R Only port numbers 62000–63000 can be assigned.
R Configure your wireless router’s port forwarding feature to forward these ports to the static IP
address that you have assigned to the hub.
6
When finished, tap [OK].
[MTU Settings] (maximum data size setting)
This setting affects how data is sent over the network. Typically this setting does not need to be changed.
This setting affects how data is sent over the network. Typically this setting does not need to be changed.
1
From the [Home Network] app home screen, tap [Settings].
2
Tap [Wi-Fi Settings].
3
Tap [MTU Settings].
4
Select the desired value and then tap [OK].
Setting the hub’s Wi-Fi settings again
If your wireless router’s SSID (i.e., network name) or password changes, or if you replace your wireless
router with a new one that uses a different SSID or password, you will need to set the hub’s Wi-Fi
settings again.
If a cordless handset is registered to the hub, you can use the cordless handset to set the hub’s Wi-Fi
settings. Refer to the Wi-Fi settings information in the operating instructions included with your cordless
handset.
router with a new one that uses a different SSID or password, you will need to set the hub’s Wi-Fi
settings again.
If a cordless handset is registered to the hub, you can use the cordless handset to set the hub’s Wi-Fi
settings. Refer to the Wi-Fi settings information in the operating instructions included with your cordless
handset.
1
Press and hold the 3 registration buttons on the side of the hub and the Wi-Fi SETUP button on the
back of the hub at the same time (4 buttons total) until the hub’s LED indicator blinks in green and
yellow.
back of the hub at the same time (4 buttons total) until the hub’s LED indicator blinks in green and
yellow.
2
Wait for the hub’s LED indicator to light in yellow.
3
From the [Home Network] app home screen, open the options menu (see “Displaying the options
menu”, Page 37).
menu”, Page 37).
4
If your mobile device is registered to only one hub
Tap [Deregistration from Hub]
Tap [Deregistration from Hub]
® [OK].
110
Using the app