Panasonic KXMB2061E 操作指南
Problem
Cause & Solution
The other party complains
that they cannot send a
document.
that they cannot send a
document.
R The receiving mode is set to TEL mode. Receive the document manually
(page 64) or change the receiving mode to TAM/FAX mode (page 62), FAX
ONLY mode (page 63) or TEL/FAX mode (page 64).
ONLY mode (page 63) or TEL/FAX mode (page 64).
R The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 16) or remove the jammed
paper (page 125).
paper (page 125).
R If the PC fax setting (feature #442 on page 84) is set to “ALWAYS”, check
the connection between the computer and the unit.
R If the fax preview mode (feature #448 on page 67) is set to “ON”, use the
web browser on the computer connected via the LAN to view, print or save
the documents, and then erase unnecessary documents (page 67).
the documents, and then erase unnecessary documents (page 67).
I cannot select the desired
receiving mode.
receiving mode.
R If you want to set TAM/FAX or FAX ONLY mode:
– select the desired mode using feature #400 (page 80), and press MAuto
AnswerN repeatedly to turn ON the MAuto AnswerN light.
R If you want to set TEL mode or TEL/FAX mode:
– select the desired mode using feature #404 (page 80), and press MAuto
AnswerN repeatedly to turn OFF the MAuto AnswerN light.
When an extension telephone
is connected, I cannot receive
documents by pressing
MGNMBNM9N.
is connected, I cannot receive
documents by pressing
MGNMBNM9N.
beforehand.
R Press MGNMBNM9N firmly.
R You may have changed the remote fax activation code from MGNMBNM9N
R You may have changed the remote fax activation code from MGNMBNM9N
(default setting). Verify the remote fax activation code (feature #434 on
page 83).
page 83).
I cannot hear a dial tone.
R If you use a splitter/coupler to connect the unit, remove the splitter/coupler
and connect the unit to the wall socket directly. If the unit operates properly,
check the splitter/coupler.
check the splitter/coupler.
R Disconnect the unit from the telephone line and connect a known working
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
R The mains lead or telephone line cord is not connected. Check the
R If you connected the unit through a computer modem, connect the unit
directly to a telephone line socket.
I cannot make calls.
R The cordless handset is too far from the base unit. Move closer and try
again.
R Another unit is in use. Wait and try again later.
R Answering machine is being used. Wait and try again later.
R Answering machine is being used. Wait and try again later.
The unit does not ring.
The other party complains
they only hear a fax tone and
cannot talk.
they only hear a fax tone and
cannot talk.
used for faxes.
The MRedialN or MPauseN
button on the base unit does
not function properly.
button on the base unit does
not function properly.
R If this button is pressed during dialling, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialled will be
redialled.
redialled.
I cannot page a cordless
handset or base unit.
handset or base unit.
R The cordless handset is too far from the base unit.
I cannot receive a fax
document on the computer.
document on the computer.
R Make sure the following features are set beforehand.
– PC fax reception (feature #442 on page 84)
– Computer setting for the PC fax reception (feature #443 on page 30)
– Computer setting for the PC fax reception (feature #443 on page 30)
117
13. Help