Panasonic KXMB2061E 操作指南

下载
页码 156
Screws (not supplied)
R The charger can be mounted on the wall, if
required.
25 mm
C
A
B
2 mm
*1
*1 Use screws longer than 20 mm.
Caution:
USE ONLY WITH the supplied Panasonic AC
adaptor.
The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet. Do
not connect the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor may cause
it to become disconnected.
Press the AC adaptor plug firmly.
2.2 Battery charge
Place the cordless handset on the charger for about 7
hours
 before initial use. Confirm “Charging” is
displayed.
When the batteries are fully charged, the charge
indicator (A) goes OFF.
A
C
B
Note:
R It is normal for the cordless handset to feel warm
during charging.
R Clean the charge contacts of the cordless handset
(B) and charger (C) with a soft and dry cloth once
a month. Clean more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Icon
Battery level
High
Medium
Low
Needs charging.
Panasonic Ni-MH battery performance (supplied
batteries)
Operation
Operating time
In continuous use
18 hours max.
Not in use (standby)
170 hours max.
Note:
R It is normal for batteries not to reach full capacity at
the initial charge. Maximum battery performance is
reached after a few complete cycles of charge/
discharge (use).
R Actual battery performance depends on a
combination of how often the cordless handset is in
use and how often it is not in use (standby).
R Even after the cordless handset is fully charged, the
cordless handset can be left on the charger without
any ill effect on the batteries.
22
2. Preparation