Panasonic DP-C354 操作指南
45
Chapter 2 Basic Fax Transmission
Getting an Outside Line Using PIN Code
Access
If your PBX requires a PIN (Personal Identification Number) Code to access an external line, your
machine can be set to prompt the user to enter the PIN Code before dialling.
machine can be set to prompt the user to enter the PIN Code before dialling.
This function is available when “39 PIN Code Access” in Fax/Email Settings> Fax Parameters is set to
“Suffix” or “Prefix”.
“Suffix” or “Prefix”.
When “39 PIN Code Access” is set to “Prefix”, the dialling procedure is as follows:
(Available for some countries only.)
(Available for some countries only.)
z
This feature is available in certain countries only.
z
This feature is not available when dialling from a connected external telephone.
z
The standard setting of “39 PIN Code Access” is set to “None”. For instructions on how to change the
standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the
provided CD-ROM.
standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the
provided CD-ROM.
1
Place Original(s).
z
Refer to Placing Originals (Facsimile/Internet
Fax) in the Operating Instructions (For Basic
Operations) of provided booklet.
Fax) in the Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Fax Key.
3
Set “Quality Adj.” as required.
z
4
Select “Address Book”, and then
select a destination.
select a destination.
z
5
Press the Start key.
6
Enter a PIN Code, and then select
“OK”. (Up to 36 digits).
“OK”. (Up to 36 digits).
The original(s) are stored into memory with a
file number. Then starts dialling the telephone
number.
file number. Then starts dialling the telephone
number.